The inspiration for this post comes from this blogger who showed how to make popsicle stick bracelets. Bending popsicle sticks/tongue depressors seemed like a cool idea that I wanted to expand on. I researched what the best way to bend wood (on a wood working forum), and came up with steam as a fast effective means to bending wood. You can see my video tuorial on how to bend these craft sticks below.
The flowers on the right are fake so I did not add water to the vase. If you are going to fill it with water I would find a smaller vase and put it inside. Craft sticks are not finished wood and probably would not hold up to moisture well.
Used a steamer basket filled with enough tap water to last you about 20 min (or keep refilling water). Steam sticks for 15 minutes and using heat resistant gloves remove from steam one at a time. Bend popsicle sticks in same vase or similar sized vase that you want to decorate. After sticks are bent and dry (about a day) you can spray stain them and seal them with polyurethane. The words are wood burned on. If you want to wood burn then do it before you bend the sticks. I used a soldering iron to wood burn but I would not recommend it. The soldering iron did not get hot enough and the stick was too long and hard to control. Please see video tutorial for full details on bending wood.
You can put a whole message on the inside. I was thinking about putting lyrics to a favorite song on each line.
